EXIT pool heat pump 22m3 (5.5kW) - black

The EXIT pool heat pump is a device to heat up the pool water. The heat pump has a capacity of 22,000 liters (5.5 kW) and can easily be connected to filter pumps with a capacity of 530 gal/h. The heat pump converts the outside air into heat and works even at an outside temperature of 10 degrees. The heat generated is then used to heat the pool water to a whopping 40 degrees. With the heat pump from EXIT Toys you not only extend the bathing season, but you can also use your pool on less hot days. 

Easy installation

The EXIT heat pump can be easily connected to the pool and the filter pump, as only two hoses need to be connected. One hose connects to the filter pump and the other to the pool.

Sustainable heat pump

The EXIT heat pump for swimming pools is easy to operate via a digital display on which you can set the water temperature. When the water has reached the set temperature, the pump will turn off and automatically start working again when the water falls below the set temperature again. In this way, the pump only consumes energy when it is actually being used.

The COP value also indicates the sustainability of the pump. At an outside temperature of 26 degrees, the efficiency can reach up to 5.50 kilowatt hours! So if 1 kWh of electricity goes into the pump, 5.5 kWh of heat goes into the pool. That is a heat gain of 4.5 kWh! In short: the EXIT pool heat pump is easy to use and at the same time an energy-efficient method of heating the pool water.

Characteristics:

• number of volts: 230 V
• number of watts: 1300 watts
• IP code: IPX4
• pool content: ≤ 22 m³ (5.5 kW)
• heat pump temperature range: 15 - 40 ℃
• working off: 10 - 43℃
• filter performance: 530 gph (2006 liters)

For hygienic reasons, this product cannot be returned if they have been removed from the protective packaging.